| Nov 23, 2011 | Microsystems Division of Leister becomes Axetris AG Kägiswil, 23.11.2011, Leister, based in Kaegiswil, Switzerland announced today that it will transfer its Microsystems Division Axetris into an independent company Axetris AG as part of a general restructuring. The former Leister Process Technologies will be transferred into a holding structure with independent limited companies. All group companies are in possession and under the overall direction of Christiane Leister. |
| Nov 4, 2010 | Axetris presents its extended product portfolio of MEMS based infrared sources. |
| The IR source is a blackbody emitter, based on a MEMS chip. Its main characteristics are rugged design, high emissivity (0.95), low power consumption and long lifetime (>10 years). The high modulation speed of up to 100 Hz is achieved due to the low thermal mass of the MEMS chip. more | |
| Nov 4, 2010 | Ultra - compact OEM mass flow meters and controllers |
| Axetris has further expanded its mass flow meter and controller range. With the new flow channel design it is now possible to measure and control extremely low flow ranges with an unprecedented accuracy and stability. The new types support now beside 0…5 V, 4…20 mA, RS232 also RS 485. more | |
| Nov 4, 2010 | Ultra - compact OEM mass flow controllers |
| The new Axetris mass flow controller modules MFC 2022 measure a mere 50 x 48 x 25 mm and are designed for the requirements of demanding OEM customers. The modules are ideally suited for analytical instruments in the area of gas chromatography, thermal analysis, bioreactors, sputtering, CO2 gas lasers and more.more | |
| Nov 4, 2010 | Ultra - compact OEM mass flow meters |
| With a mere size of 34 x 48 x 16 mm, the OEM mass flow meter module MFM 2020 is among the smallest on the market. It is characterized by its fast response time and high accuracy. The rugged design makes the module to a large extent insensitive against sudden pressure or flow changes. The module is based on the proprietary MEMS based mass flow sensor designed by Axetris.more | |
| Nov 4, 2010 | Laser gas detector OEM modules for selective detection and monitoring of Methane |
| Axetris’ Laser Gas Detectors allow the selective detection & monitoring of Methane over a wide range of concentrations - from low ppm-levels up to several percent. The self-contained modules are designed for integration by Original Equipment Manufactures (OEMs) and are based on proprietary technologyenhanced tunable diode laser spectrometry. The systems combine advantages like high target gas selectivity, continuous sensor status monitoring, contact-less optical gas detection, low-cost of ownership and calibration-free operation.more | |
| Feb 4, 2010 | Leister Process Technologies completes the integration of IR Microsystems into its Axetris Division |
| Leister Process Technologies, based in Kägiswil, Switzerland announced today that all former activities of ®IR Microsystems, previously based in Lausanne/Switzerland, have been successfully integrated into the operations of its Axetris division.. more | |
| Jan 20, 2010 | Next Generation Gas Detection |
| IR Microsystems “microLGD” is an OEM Module, or sub-mount for the continuous monitoring of NH3, CH4, CO2 or O2 (others on request). Based on state-of-the-art Tunable Diode Laser Spectrometry (TDLS), the system has virtually no cross-sensitivity with other gases and features an innovative, patented measurement principle without the need for a reference-channel... more | |
| Jan 9, 2009 | Axetris Division of Leister Process Technologies, a leading provider of micro technology products and services, launches a new website. |
| The launch of the new website is another important step to further raise the industry’s awareness of Axetris as a world class manufacturer of micro technology products including micro-optical lenses, MEMS based mass flow sensors, infrared sources, laser gas detectors and flow cytometers... more | |
| Sep 22, 2008 | Ultra compact modules for gas mass flow monitoring and control |
| Axetris, the Microsystem division of Leister, is announcing the introduction of the modular mass flow meter- and controller range MFM/MFC 2000 for gases. The modules are based on the unique micro- machined mass flow sensor designed by Axetris... more | |
| Sep 16, 2008 | Extended Product Portfolio of the Axetris Infrared Source |
| The IR source is based on a blackbody emitter. Its main characteristics are: high emissivity (0.95), low power consumption and long lifetime (>10 years). The high modulation is due to the low thermal mass (up to 100 Hz)... more | |
| Sep 4, 2007 | LEISTER Process Technologies acquires a new company building |
| Due to the pleasing growth during the past years and the creation of new employment opportunities in connection with this, the Swiss corporation LEISTER Process Technologies located in the Canton Obwalden requires... more | |
| Jul 31, 2007 | Leister acquires Infrared Gas Sensor Company IR Microsystems SA |
| Leister Process Technologies announced the acquisition of the Swiss sensor company IR Microsystems SA, an innovative supplier of diode laser based gas detection modules, to expand... more |
more news by the Leister Group