The new UNIROOF (AT/ST) automatic roof welder is the service-friendly partner for the welding of thermoplastic membranes on flat roofs and roofs with low slopes (up to 30°).
The UNIROOF AT/ST makes it possible to weld all thermoplastic membranes, as well as EPDM sealing sheets. With its ultra-slim housing construction and movable transportation axle, the new UNIROOF AT/ST can easily be used for close edge welding (within 100mm / 4 inches of the edge), on top of parapets, flat surfaces, and in confined spaces without resetting.
The integrated direct-driven, maintenance-free pressure wheel is attractive for its service-friendliness, higher pressure and significantly greater welding speed compared to competitive products.
The flexible roof structure profile kit eliminates hand welding and, at 17.5 kg / 39 lbs, the UNIROOF AT/ST can be conveniently transported anywhere.
The completely controlled closed-loop system―for drive, temperature and air volume―assures that processes and investments, for builders and companies alike, are safe.
No more time consuming converting: UNIROOF masters welding close to the edge (up to 100 mm/ 4 inches) at or on the parapet, and wherever it gets narrow.
easy to maintain!
The direct-driven, maintenance-free pressure wheel [drive motor integrated in pressure wheel] is easy to service.
Greater efficiency at construction sites: The new UNIROOF class brings an additional 38% (ST) to 66% (AT) higher welding performance compared to similar machines.