By using this site you agree to the use of cookies for analytics and personalized content. Find out more here

Leister Europe

Leister Amerikas

Leister Asia and Oceania

Leister Africa and Middle East

  • Albania | EN
  • Andorra | ES / FR / EN
  • Armenia | EN
  • Azerbaijan | EN
  • Belarus | EN
  • Belgium | NL / FR / EN
  • Bosnia - Herzegovina | EN
  • Bulgaria | EN
  • Croatia | EN / DE
  • Cyprus | EN
  • Czech Republic | EN / DE
  • Denmark | EN
  • Estonia | EN
  • Faeroe Islands | EN
  • Finland | EN
  • France | FR / EN / DE
  • Georgia | EN
  • Germany | DE / EN
  • Gibraltar | EN
  • United Kingdom | EN
  • Greece | EN
  • Hungary | EN / DE
  • Iceland | EN
  • Ireland | EN
  • Italy | IT / EN
  • Kosovo | EN
  • Latvia | EN
  • Lithuania | EN
  • Luxembourg | DE / FR / EN
  • Macedonia | EN
  • Malta | IT / EN
  • Moldova | EN
  • Monaco | FR / IT / EN
  • Montenegro | EN
  • Netherlands | NL / EN
  • Norway | EN
  • Austria | DE / EN
  • Poland | DE / EN
  • Portugal | EN / ES
  • Liechtenstein | DE
  • Romania | EN
  • Russia | EN
  • San Marino | IT / EN
  • Serbia | EN
  • Slovakia | EN / DE
  • Slovenia | EN / DE
  • Spain | ES / EN
  • Sweden | EN
  • Switzerland | DE / FR / IT / EN
  • Turkey | EN
  • Ukraine | EN
  • Vatican | IT / EN
  • Anguilla | EN
  • Antigua & Barbuda | EN
  • Argentinia | ES / EN / DE
  • Aruba | EN / NL / ES
  • Bahamas | EN
  • Barbados | EN
  • Belize | ES / EN
  • Bolivia | ES / EN
  • Brazil | EN / ES
  • Canada | EN / FR
  • Caribbean Netherlands | EN / NL
  • Cayman Islands | EN
  • Chile | ES / EN
  • Colombia | ES / EN
  • Costa Rica | ES / EN
  • Cuba | ES / EN
  • Curaçao | EN / NL
  • Turks & Caicos Islands | EN
  • Dominican Republic | ES / EN
  • Ecuador | ES / EN
  • El Salvador | ES / EN
  • Grenada | EN
  • Guadeloupe | EN / FR
  • Guatemala | ES / EN
  • Haiti | ES / EN
  • Honduras | ES / EN
  • Jamaica | EN
  • Martinique | EN / FR
  • Mexico | ES / EN
  • Montserrat | EN
  • Nicaragua | ES / EN
  • Panama | ES / EN
  • Peru | ES / EN
  • Puerto Rico | ES / EN / DE
  • Saint Barthélemy | EN / FR
  • Saint Kitts & Nevis | EN
  • Saint Lucia | EN
  • Saint Martin | EN / FR
  • Saint Vincent & Grenadines | EN
  • Sint Maarten | EN / NL
  • USA | EN / ES
  • Venezuela | ES / EN
  • Virgin Islands UK | EN
  • Virgin Islands US | EN
  • Australia | EN
  • Bangladesh | EN
  • Hong Kong SAR | ZH / EN
  • India | EN
  • Indonesia | EN
  • Japan | JA / EN
  • Kazakhstan | EN
  • Korea | EN
  • Kyrgyzstan | EN
  • Macao SAR | EN / ZH
  • Malaysia | EN
  • Mongolia | EN
  • Myanmar | EN
  • New Zealand | EN
  • Philippines | EN
  • PR China | ZH / EN
  • Singapore | EN
  • Sri Lanka | EN
  • Tadzhikistan | EN
  • Taiwan - China | EN
  • Thailand | EN
  • Turkmenistan | EN
  • Uzbekistan | EN
  • Vietnam | EN
  • Afghanistan | EN
  • Algeria | FR / EN
  • Bahrain | EN
  • Benin | EN / FR
  • Botswana | EN
  • Burkina Faso | EN / FR
  • Egypt | EN / FR
  • Ghana | EN
  • Guinea | EN / FR
  • Guinea-Bissau | EN / PT / ES
  • Iran | EN
  • Iraq | EN
  • Israel | EN
  • Ivory Coast | FR / EN
  • Jordan | EN
  • Kenya | EN / FR
  • Kuwait | EN
  • Lebanon | EN
  • Lesotho | EN
  • Liberia | EN
  • Libya | EN
  • Malawi | EN
  • Mali | EN / FR
  • Morocco | FR / EN
  • Mozambique | EN
  • Namibia | EN
  • Oman | EN
  • Pakistan | EN
  • Qatar | EN
  • Saudi Arabia | EN
  • Senegal | EN / FR
  • Sierra Leone | EN
  • South Africa | EN / NL
  • Sudan | EN
  • Swaziland | EN
  • Syria | EN
  • Tanzania | EN
  • Togo | EN / FR
  • Tunisia | FR / EN
  • U.A.E | EN
  • Yemen | EN
  • Zambia | EN
  • Zimbabwe | EN

News: 08/20/2018

Leister Technologies 2018 DVS Training

DVS Training at Leister Technologies, LLC

Leister Technologies Hosts Outstanding DVS Certification and Licensing Program
Recently, Leister Technologies provided our customers with two fantastic one-week DVS (Deutscher Verband für Schweissen und verwandte Verfahren) training courses at our Itasca, Illinois, headquarters. The plastic fabrication course was jam-packed with industry knowledge, ranging from thermoplastic structure and physics, as well as theoretical and practical hot gas welding processes.

 

This course successfully prepared attendees with the proper knowledge on the materials they're working with, as well as expert welding techniques to perfect their craft in the field. At the end of the course, participants took the theoretical and practical exams, which adheres to DVS 2212-1 and DVS 2212-3 standards. All participants passed the exams with flying colors and can call themselves, "plastic welders according to DVS 2212-1/-3" standards. 

 

The course was led by Jens Heyer from Aachen University in Germany and Leister Technologies' product specialist, Dave Rothbard; who arranged and hosted the program. I sat down with Dave, who gave further insight into what this course encompassed. 

 

How was it? How'd the attendees like the course?

The 2018 DVS training program was great! We have received lots of positive feedback from both Leister employees and external trainees. Jens did a fantastic job leading the course from the classroom to the hands-on training. He took a deep dive into thermoplastic, hot gas welding and extrusion welding theory, which was appreciated by the trainees. From this knowledge dump, they were able to increase their intelligence on the material they work with in the field, as well as their welding capabilities. 

 

What did a typical day look like for this course?

The beginning of the day started in the classroom, going over theory, while the afternoon focused on practical welding. It was important to start off the day with theory as it gave trainees more insight on how to complete securely bonded welds. 

 

 

What were some of the topics covered in the class?

  • Structure and physics of thermoplastics
  • Thermoplastic material properties
  • Hot gas welding processes, parameters, characteristics and external effects of speed welding
  • Extrusion welding overview including equipment, processes and settings
  • Extrusion weld parameter calculation and tool set up
  • Extrusion welding performance and best practices
  • Hands-on hot gas speed welding/extrusion welding
  • Welding tool configuration and parameter setting
  • Proper welding techniques
  • Explanation of visual characteristics of welds performed
  • Optional laboratory examination and destructive testing for DVS certification

 

What made this course so successful and what do you think will make for an even better training course next year?

Jens ability to transfer his depth of knowledge in a way that's easily understood, made for a very pleasant experience for trainees. Not only was Jens a big part of the success of this course, but the trainee's willingness and desire to learn as much information as possible, made for a smooth class all-around.

 

Next year we will alter some of the equipment and material to better fit the practical welding. We're planning on offering the training at a time during the year that's more convenient for fabricators. Our goal is to be more proactive in the field when offering and explaining the training to existing and prospective customers. 

 

What's the benefit of attending this course/how important is it for these individuals to become certified and/or licensed?

It varies; however, the certification lends credibility when discussing capabilities. The license is proof that the individual welder is qualified and has passed a rigorous examination of theoretical and practical plastic welding. It also gives lots of knowledge and confidence to welders in the process, as well as their ability to weld. Companies can offer customers guaranteed work based on DVS specs. 

 

 

Did you notice a difference in the welds when trainees first began to the time that they finished the course?

Absolutely yes. Trainees listened intently to all the information delivered by Jens and studied his every move as he welded. By the end of the course, it was clear that the knowledge they absorbed had resulted in improved welding techniques and ability. Attendees were able to perfect high quality, permanent weld geometry and seams that even wow Jens. 

 

What type of welds were attendees performing most?

V-seam and fillet were the most commonly performed welds. To achieve the v-shaped angle that's typical for the v-seam, the work pieces are either bevelled or positioned at an appropriate angle to each other. The fillet weld is one of the most frequently-used seam geometries. It's produced by welding two work pieces that are met in a t-joint. 

For more information, view our plastic fabrication catalog: Extrusion and hot-air hand welders

 

Will there be another DVS training course this year/next year? If so, what can interested parties expect for the next course?

If it were up to me, then there will be another DVS course next year. Interested guests can expect comprehensive and verifiable plastic fabrication welding training according to DVS standards. 

 

Is there anyone you'd like to thank and give a "shout out" to?

Absolutely. This course couldn't have been put together and result in so much success if it weren't for the following people and organizations:

  • Röchling Group for supplying the material
  • Jens Heyer-Master Craftsman-Head of Department of Plastics Technology, Aachen Univeresity
  • Reto Britschgi, Product Manager Plastic Fabrication, Leister Technologies AG
  • Leister Technologies, LLC Management/Marketing/Sales, Administration and Warehouse employees - for cooperation and assistance
  • All the attendees that participated and completed the program

Item added to watchlist