The WELDPLAST S2 TPO extruder is designed specifically to process thermoplastic elastomers with an olefin base. This type of plastic requires a different plasticization process, as well as specific extruder screws. TPO plastics are used primarily in tunnel construction and underground engineering. In this kind of work and application, the WELDPLAST S2 TPO makes the most of its size and weight due to a large part of the welds taking place overhead. These applications can only be handled over a longer period of time with such a light device.
Technical Data
Metric
Imperial
Article
136.602
Voltage
230 V
Frequency
50/60 Hz
Power
3000 W
Welding rod
ø 3–4 mm / 0.12–0.16 in
Material output ø 3 mm
Measured with PE - performance can be affected by various factors.
0.6 - 1.3 kg/h
Material output ø 4 mm
Measured with PE - performance can be affected by various factors.
1 - 2 kg/h
Welding materials
FPO; HDPE; LDPE; LLDPE; PP; TPO
Weldable sheet/membrane thickness
Recommended for specified sheet thickness
1 - 3 mm
Air guide
Internal
Screw heating
Coil heater
Air temperature control
Closed loop
LQS
The device features LQS (Leister Quality System) data recording
